Tools

Free tools for energy community organisers

These three tools from EnCo (Energia Collettiva) help you take the first steps before you talk to anyone. They work entirely in your browser. There's no account and nothing to upload, and nothing you type is sent anywhere; your inputs are kept only in this browser so you can come back to them. Every result is an indicative estimate to get a conversation started. It is not a quote or a guarantee.

Community Feasibility Check

Before you call a meeting, it helps to know whether the idea is worth a closer look. This calculator gives you a first, rough picture. Tell it roughly where you are, how many households might join and how much roof space could take solar panels. It estimates how much electricity those panels could produce in a year, how much of it the community might use itself, and a savings range based on the energy price you enter.

Everything runs in your browser and nothing is sent anywhere. The result is a starting point for a conversation, not a quote. For real figures, you will always need an installer and local advice.

Paper hand laying out solar panels on a marked rooftop area

Pick the area whose climate is closest to yours. The yield is how much electricity 1 kW of panels makes in a year (kWh per kWp per year).

Default yields come from PVGIS, the EU Joint Research Centre's free solar tool (version 5.2). They assume flat-mounted panels, one reference point in each area and 14% system losses (retrieved 21 November 2026). Panels tilted toward the sun usually produce more. For a figure for your exact address, use PVGIS directly at re.jrc.ec.europa.eu/pvg_tools.

Count everyone who might join, including businesses or public buildings.

Only the part of the roof that could take panels: sunny, and not taken up by chimneys or equipment.

You can find it on an electricity bill. If you leave it empty, the tool does not limit the result by consumption.

Enter the price per kWh from a recent bill, in your own currency. We don't fill this in for you, because prices differ widely and change often.

Assumptions (you can edit them)

Planning assumption set by EnCo for this demo, not measured data. Your installer can give you the real figure for your roof and panels.

Planning assumption for the low end of the range. Change it if you know better.

Planning assumption for the high end of the range. Change it if you know better.

Example to try: Northern Italy, 24 households, 300 m² of flat roof, a price of 0.25 per kWh.

Indicative estimate — not a quote or a guarantee.

Your result will appear here. Fill in the fields and press Calculate.

Fair-Share Calculator

When a community shares solar energy, one question comes up at every meeting: who gets how much? This calculator compares three simple sharing rules side by side, using the same numbers. Start with our sample month for a small fictional community, or type in your own figures.

Each rule gets a table, a bar chart and a short plain-language sentence you can read out at an assembly. These rules are examples to help your group talk it through. They are not the legal rules of any country, so check what applies where you are.

A tiled share bar under one sun, divided among six homes
Data to use

Sample data: a fictional community.

Sample month: 600 kWh of shared solar
MemberTotal use (kWh)Use during production hours (kWh)
Flat 125090
Flat 218040
Flat 3320150
Corner shop400310
Flat 515050
Community hall200160
Total1,500800

Indicative estimate — not a quote or a guarantee.

Energy Timing Planner

A community gets more from its own solar when members use energy while the panels are producing. Some appliances can wait a few hours without anyone noticing: the washing machine, the dishwasher, the water heater, an electric car. Pick a sample day and tick the appliances you can move. The planner shows simple time windows on a 24-hour timeline, around the hours when solar output is highest on that sample day. The days are examples, not a weather forecast. For your own plan, check the real conditions on the day.

Sample day

Sample forecast: an example day, not real weather.

Appliances I can move

Indicative estimate — not a quote or a guarantee.

Your plan will appear here. Pick a sample day, tick appliances and press Show my plan.

Running this every month for real?

That's what EnCo is built for: one place to plan, run and share a renewable energy community. Early access is free.